Linksys SPA2102 VoIP router/ Analog Telephone Adap

Linksys SPA2102 VoIP Adapter ATA/ VoIP router - Unlocked Linksys / Sipura SPA-2102 VoIP Adapter Ports: Two FXS + Two Ethernet Status: Unlocked Supported Protocols: SIP Product Description The SPA2102 is the latest dual FXS port analog VoIP adapter from Linksys. The SPA2102 features a built in router to separate your VoIP network from other devices or you can use the SPA2102 as your router to connect other devices to on your network. Inexpensive, easy to install and simple-to-use, the SPA2102 connects a standard telephone or fax machine to IP-based data networks. VoIP service providers can offer residential and business users traditional and enhanced communication services viathe customer's broadband connection to the Internet. The SPA2102 features two POTS (Plain Old Telephone Service) ports to connect existing analog phones, fax machines, or to a PBX system. The SPA2102 includes 2 100BaseT RJ45 Ethernet interfaces (LAN-WAN) to connect to a home or office LAN, as well as an Ethernet connection to a broadband modem or router (WAN). Each SPA2102 service line can be independently configured via software controlled by the service provider or the end user. With the SPA2102, users are able to protect and extend their investment in telephones, conference speakerphones, and fax machines as well as control their migration to IP with an extremeley affordable, reliable solution. Installed by the end user and remotely provisioned, configured and maintained by the service provider, each SPA2102 converts voice traffic into data packets for transmission over an IP network. Compact in design, the SPA2102 can be used in consumer and business VoIP service offerings including a full-featured IP Centrex environment. The SPA2102 uses international standards for voice and data networking for reliable voice and fax operation. Toll Quality Voice and Carrier-Grade Feature Support The SPA2102 delivers clear, high-quality voice communication in a variety of network conditions. Excellent voice quality in challenging, changeable IP network environments is made possible via our advanced implementation of standard voice coding algorithms. The SPA2102 is interoperable with common telephony equipment like facsimile, voicemail, PBX/KTS and interactive voice response systems. Large-Scale Deployment and Management The SPA2102 offers all the key features and capabilities with which service providers can provide customized services to their subscribers. The SPA2102 can be remotely provisioned and supports dynamic, inservice software upgrades. A secure profile upload saves providers the time, expense and hassle of managing and pre-configuring or re-configuring customer premises equipment (CPE) for deployment. Ironclad Security The SPA2102 supports secure, encryption-based methods for communication, provisioning and servicing. SPA2102 Telephony Features: Two voice ports (RJ11) for analog phones or Fax machines Impedance Agnostics - 8 Configurable Settings Call Waiting, Cancel Call Waiting, Call Waiting Caller ID Caller ID with Name/Number (Multi-national Variants) Caller ID Blocking Call Forwarding: No answer, Busy, All Do Not Disturb Call Transfer Three-way Conference Calling with Local Mixing Message Waiting Indication - Visual and Tone Based Call Return Call Back on Busy Call Blocking with Toll Restriction Delayed Disconnect Distinctive Ringing - Calling and Called Number Off-hook Warning Tone Selective/Anonymous Call Rejection Hot line and Warm Line Calling Speed Dialing of 8 Numbers/Addresses Music on Hold Fax: G.711 Pass Through or Real Time Fax over IP via T.38 Package Contents: 1 - SPA2102 Phone Adapter Unit 1 - 5v Power Adapter 1 - RJ45 Ethernet Cable 1 - Quick Installation Guide Data Networking: MAC Address (IEEE 802.3) IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883) ARP - Address Resolution Protocol DNS - A Record (RFC 1706), SRV Record (RFC 2782) DHCP Client - Dynamic Host Configuration Protocol (RFC 2131) DHCP Server - Dynamic Host Configuration Protocol (RFC 2131) ICMP - Internet Control Message Protocol (RFC792) TCP - Transmission Control Protocol (RFC793) UDP - User Datagram Protocol (RFC768) RTP - Real Time Protocol (RFC 1889) (RFC 1890) RTCP - Real Time Control Protocol (RFC 1889) DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349) SNTP - Simple Network Time Protocol (RFC 2030) Upload Data Rate Limiting - Static and Automatic QoS - Voice Packet Prioritization over Other Packet Types Router or Bridge Mode of Operation MAC Address Cloning Port Forwarding Voice Gateway: SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264) SIP Proxy Redundancy - Dynamic via DNS SRV, A Records Re-registration with Primary SIP Proxy Server SIP Support in Network Address Translation Networks - NAT (incl. STUN) Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP Codec Name Assignment Voice Algorithms: G.711 (A-law and μ-law) G.726 (16/24/32/40 kbps) G.729 A G.723.1 (6.3 kbps, 5.3 kbps) Dynamic Payload Adjustable Audio Frames per Packet Fax Capability: Fax Tone Detection Pass-Through Fax Pass-Though - Using G.711 Security: Password Protected System Reset to Factory Default Password Protected Admin and User Access Authority Provisioning/Configuration/Authentication: HTTPS with Factory Installed Client Certificate HTTP Digest - Encrypted Authentication via MD5 (RFC 1321) Up to 256-bit AES Encryption Provisioning, Administration & Maintenance: Web Browser Administration & Configuration via Integral Web Server Telephone Key Pad Configuration with Interactive Voice Prompts Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP Asynchronous Notification of Upgrade Availability via NOTIFY Non-intrusive, In-Service Upgrades Report Generation & Event Logging Stats in BYE Message Syslog & Debug Server Records - Per Line Configurable Per Line and Purpose Configurable Syslog and Debug Options Physical Interfaces:: 2 100baseT RJ-45 Ethernet Port (IEEE 802.3) 2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring) Subscriber Line Interface Circuit (SLIC): Ring Voltage: 40-55 VRMS Configurable * Ring Frequency: 10 Hz - 40 Hz * Ring Waveform: Trapezoidal and Sinusoidal * Maximum Ringer Load: 3 REN On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL Off-hook current: 25 mA min Terminating Impedance: 8 Configurable Settings including Regulatory Compliance: North America 600 ohms, European CTR21 FCC (Part 15, Class B) , CE, ICES-003 Power Supply: Switching Type (100-240v) Automatic DC Input Voltage: +5 VDC at 2.0 A Max. Power Consumption: 5 Watts Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord Indicator Lights/LED: Power, Internet, Phone 1, Phone 2